Update dependency charset-normalizer to v3

[renovate]

This PR contains the following updates:

Package	Change	Age	Confidence
charset-normalizer (changelog)	==2.0.12 -> ==3.4.4

---

Release Notes

jawah/charset_normalizer (charset-normalizer)

v3.4.4

Compare Source

Changed

• Bound setuptools to a specific constraint setuptools>=68,<=81.
• Raised upper bound of mypyc for the optional pre-built extension to v1.18.2

Removed

• setuptools-scm as a build dependency.

Misc

• Enforced hashes in dev-requirements.txt and created ci-requirements.txt for security purposes.
• Additional pre-built wheels for riscv64, s390x, and armv7l architectures.
• Restore multiple.intoto.jsonl in GitHub releases in addition to individual attestation file per wheel.

v3.4.3

Compare Source

Changed

• mypy(c) is no longer a required dependency at build time if CHARSET_NORMALIZER_USE_MYPYC isn't set to 1. (#​595) (#​583)
• automatically lower confidence on small bytes samples that are not Unicode in detect output legacy function. (#​391)

Added

• Custom build backend to overcome inability to mark mypy as an optional dependency in the build phase.
• Support for Python 3.14

Fixed

• sdist archive contained useless directories.
• automatically fallback on valid UTF-16 or UTF-32 even if the md says it's noisy. (#​633)

Misc

• SBOM are automatically published to the relevant GitHub release to comply with regulatory changes.
  Each published wheel comes with its SBOM. We choose CycloneDX as the format.
• Prebuilt optimized wheel are no longer distributed by default for CPython 3.7 due to a change in cibuildwheel.

v3.4.2

Compare Source

Fixed

• Addressed the DeprecationWarning in our CLI regarding argparse.FileType by backporting the target class into the package. (#​591)
• Improved the overall reliability of the detector with CJK Ideographs. (#​605) (#​587)

Changed

• Optional mypyc compilation upgraded to version 1.15 for Python >= 3.8

v3.4.1

Compare Source

Changed

• Project metadata are now stored using pyproject.toml instead of setup.cfg using setuptools as the build backend.
• Enforce annotation delayed loading for a simpler and consistent types in the project.
• Optional mypyc compilation upgraded to version 1.14 for Python >= 3.8

Added

• pre-commit configuration.
• noxfile.

Removed

• build-requirements.txt as per using pyproject.toml native build configuration.
• bin/integration.py and bin/serve.py in favor of downstream integration test (see noxfile).
• setup.cfg in favor of pyproject.toml metadata configuration.
• Unused utils.range_scan function.

Fixed

• Converting content to Unicode bytes may insert utf_8 instead of preferred utf-8. (#​572)
• Deprecation warning "'count' is passed as positional argument" when converting to Unicode bytes on Python 3.13+

v3.4.0

Compare Source

Added

• Argument --no-preemptive in the CLI to prevent the detector to search for hints.
• Support for Python 3.13 (#​512)

Fixed

• Relax the TypeError exception thrown when trying to compare a CharsetMatch with anything else than a CharsetMatch.
• Improved the general reliability of the detector based on user feedbacks. (#​520) (#​509) (#​498) (#​407) (#​537)
• Declared charset in content (preemptive detection) not changed when converting to utf-8 bytes. (#​381)

v3.3.2

Compare Source

Fixed

• Unintentional memory usage regression when using large payload that match several encoding (#​376)
• Regression on some detection case showcased in the documentation (#​371)

Added

• Noise (md) probe that identify malformed arabic representation due to the presence of letters in isolated form (credit to my wife)

v3.3.1

Compare Source

Changed

• Optional mypyc compilation upgraded to version 1.6.1 for Python >= 3.8
• Improved the general detection reliability based on reports from the community

v3.3.0

Compare Source

Added

• Allow to execute the CLI (e.g. normalizer) through python -m charset_normalizer.cli or python -m charset_normalizer
• Support for 9 forgotten encoding that are supported by Python but unlisted in encoding.aliases as they have no alias (#​323)

Removed

• (internal) Redundant utils.is_ascii function and unused function is_private_use_only
• (internal) charset_normalizer.assets is moved inside charset_normalizer.constant

Changed

• (internal) Unicode code blocks in constants are updated using the latest v15.0.0 definition to improve detection
• Optional mypyc compilation upgraded to version 1.5.1 for Python >= 3.8

Fixed

• Unable to properly sort CharsetMatch when both chaos/noise and coherence were close due to an unreachable condition in __lt__ (#​350)

v3.2.0

Compare Source

Changed

• Typehint for function from_path no longer enforce PathLike as its first argument
• Minor improvement over the global detection reliability

Added

• Introduce function is_binary that relies on main capabilities, and optimized to detect binaries
• Propagate enable_fallback argument throughout from_bytes, from_path, and from_fp that allow a deeper control over the detection (default True)
• Explicit support for Python 3.12

Fixed

• Edge case detection failure where a file would contain 'very-long' camel cased word (Issue #​289)

v3.1.0

Compare Source

Added

• Argument should_rename_legacy for legacy function detect and disregard any new arguments without errors (PR #​262)

Removed

• Support for Python 3.6 (PR #​260)

Changed

• Optional speedup provided by mypy/c 1.0.1

v3.0.1

Compare Source

Fixed

• Multi-bytes cutter/chunk generator did not always cut correctly (PR #​233)

Changed

• Speedup provided by mypy/c 0.990 on Python >= 3.7

v3.0.0

Compare Source

Added

• Extend the capability of explain=True when cp_isolation contains at most two entries (min one), will log in details of the Mess-detector results
• Support for alternative language frequency set in charset_normalizer.assets.FREQUENCIES
• Add parameter language_threshold in from_bytes, from_path and from_fp to adjust the minimum expected coherence ratio
• normalizer --version now specify if current version provide extra speedup (meaning mypyc compilation whl)

Changed

• Build with static metadata using 'build' frontend
• Make the language detection stricter
• Optional: Module md.py can be compiled using Mypyc to provide an extra speedup up to 4x faster than v2.1

Fixed

• CLI with opt --normalize fail when using full path for files
• TooManyAccentuatedPlugin induce false positive on the mess detection when too few alpha character have been fed to it
• Sphinx warnings when generating the documentation

Removed

• Coherence detector no longer return 'Simple English' instead return 'English'
• Coherence detector no longer return 'Classical Chinese' instead return 'Chinese'
• Breaking: Method first() and best() from CharsetMatch
• UTF-7 will no longer appear as "detected" without a recognized SIG/mark (is unreliable/conflict with ASCII)
• Breaking: Class aliases CharsetDetector, CharsetDoctor, CharsetNormalizerMatch and CharsetNormalizerMatches
• Breaking: Top-level function normalize
• Breaking: Properties chaos_secondary_pass, coherence_non_latin and w_counter from CharsetMatch
• Support for the backport unicodedata2

v2.1.1

Compare Source

Deprecated

• Function normalize scheduled for removal in 3.0

Changed

• Removed useless call to decode in fn is_unprintable (#​206)

Fixed

• Third-party library (i18n xgettext) crashing not recognizing utf_8 (PEP 263) with underscore from @​aleksandernovikov (#​204)

v2.1.0

Compare Source

Added

• Output the Unicode table version when running the CLI with --version (PR #​194)

Changed

• Re-use decoded buffer for single byte character sets from @​nijel (PR #​175)
• Fixing some performance bottlenecks from @​deedy5 (PR #​183)

Fixed

• Workaround potential bug in cpython with Zero Width No-Break Space located in Arabic Presentation Forms-B, Unicode 1.1 not acknowledged as space (PR #​175)
• CLI default threshold aligned with the API threshold from @​oleksandr-kuzmenko (PR #​181)

Removed

• Support for Python 3.5 (PR #​192)

Deprecated

• Use of backport unicodedata from unicodedata2 as Python is quickly catching up, scheduled for removal in 3.0 (PR #​194)

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.