Merge tag 'i2c-host-fixes-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.14-rc5

- npcm fixes interrupt initialization sequence.
- ls2x fixes frequency setting.
- amd-asf re-enables interrupts properly at irq handler's exit.

Author: Wolfram Sang

drivers/i2c/busses/i2c-amd-asf-plat.c

@@ -293,6 +293,7 @@ static irqreturn_t amd_asf_irq_handler(int irq, void *ptr)
 		amd_asf_update_ioport_target(piix4_smba, ASF_SLV_INTR, SMBHSTSTS, true);
 	}
 
+	iowrite32(irq, dev->eoi_base);
 	return IRQ_HANDLED;
 }
 

drivers/i2c/busses/i2c-ls2x.c

@@ -10,6 +10,7 @@
  * Rewritten for mainline by Binbin Zhou <zhoubinbin@loongson.cn>
  */
 
+#include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/completion.h>
 #include <linux/device.h>
@@ -26,7 +27,8 @@
 #include <linux/units.h>
 
 /* I2C Registers */
-#define I2C_LS2X_PRER		0x0 /* Freq Division Register(16 bits) */
+#define I2C_LS2X_PRER_LO	0x0 /* Freq Division Low Byte Register */
+#define I2C_LS2X_PRER_HI	0x1 /* Freq Division High Byte Register */
 #define I2C_LS2X_CTR		0x2 /* Control Register */
 #define I2C_LS2X_TXR		0x3 /* Transport Data Register */
 #define I2C_LS2X_RXR		0x3 /* Receive Data Register */
@@ -93,6 +95,7 @@ static irqreturn_t ls2x_i2c_isr(int this_irq, void *dev_id)
  */
 static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv)
 {
+	u16 val;
 	struct i2c_timings *t = &priv->i2c_t;
 	struct device *dev = priv->adapter.dev.parent;
 	u32 acpi_speed = i2c_acpi_find_bus_speed(dev);
@@ -104,9 +107,14 @@ static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv)
 	else
 		t->bus_freq_hz = LS2X_I2C_FREQ_STD;
 
-	/* Calculate and set i2c frequency. */
-	writew(LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1,
-	       priv->base + I2C_LS2X_PRER);
+	/*
+	 * According to the chip manual, we can only access the registers as bytes,
+	 * otherwise the high bits will be truncated.
+	 * So set the I2C frequency with a sequential writeb() instead of writew().
+	 */
+	val = LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1;
+	writeb(FIELD_GET(GENMASK(7, 0), val), priv->base + I2C_LS2X_PRER_LO);
+	writeb(FIELD_GET(GENMASK(15, 8), val), priv->base + I2C_LS2X_PRER_HI);
 }
 
 static void ls2x_i2c_init(struct ls2x_i2c_priv *priv)

drivers/i2c/busses/i2c-npcm7xx.c

@@ -2554,6 +2554,13 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	/*
+	 * Disable the interrupt to avoid the interrupt handler being triggered
+	 * incorrectly by the asynchronous interrupt status since the machine
+	 * might do a warm reset during the last smbus/i2c transfer session.
+	 */
+	npcm_i2c_int_enable(bus, false);
+
 	ret = devm_request_irq(bus->dev, irq, npcm_i2c_bus_irq, 0,
 			       dev_name(bus->dev), bus);
 	if (ret)