Skip to content

Gateway configuration

Jump to bottom
dusuniot edited this page Aug 17, 2019 · 6 revisions

The gateway can be configured following these steps:

Connect the gateway to the PC and power up

according to figure 2

1

Login to the gateway

Open a web browser on PC, Input Gateway IP Address: 192.168.66.1；Enter the username and Password （Username: root Password: root），login to the gateway;

authorization_required

Make system configuration at the system menu

The timezone, password and others can be revised here.

2

Configure network at the network sub-memu

Interface_Overview

interfaces_wan_configuration

Change other settings

such as ZWave manage and MQTT settings

![develop_application_communicating_with z-wave_device](images/develop_application_communicating_with z-wave_device.png)

Clone this wiki locally