Merge branch 'for-6.11/block-post' into for-next

* for-6.11/block-post: (575 commits)
  block: don't free the integrity payload in bio_integrity_unmap_free_user
  block: don't free submitter owned integrity payload on I/O completion
  block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
  block: don't call bio_uninit from bio_endio
  block: also return bio_integrity_payload * from stubs
  block: split integrity support out of bio.h
  Linux 6.10-rc6
  ata: ahci: Clean up sysfs file on error
  ata: libata-core: Fix double free on error
  ata,scsi: libata-core: Do not leak memory for ata_port struct members
  ata: libata-core: Fix null pointer dereference on error
  x86-32: fix cmpxchg8b_emu build error with clang
  x86: stop playing stack games in profile_pc()
  i2c: testunit: discard write requests while old command is running
  i2c: testunit: don't erase registers after STOP
  tty: mxser: Remove __counted_by from mxser_board.ports[]
  randomize_kstack: Remove non-functional per-arch entropy filtering
  string: kunit: add missing MODULE_DESCRIPTION() macros
  ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
  MAINTAINERS: Update IOMMU tree location
  ...

Author: axboe

.mailmap

@@ -608,6 +608,7 @@ Simon Kelley <simon@thekelleys.org.uk>
 Sricharan Ramabadhran <quic_srichara@quicinc.com> <sricharan@codeaurora.org>
 Srinivas Ramana <quic_sramana@quicinc.com> <sramana@codeaurora.org>
 Sriram R <quic_srirrama@quicinc.com> <srirrama@codeaurora.org>
+Stanislav Fomichev <sdf@fomichev.me> <sdf@google.com>
 Stefan Wahren <wahrenst@gmx.net> <stefan.wahren@i2se.com>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@linux-foundation.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -788,25 +788,6 @@
 			Documentation/networking/netconsole.rst for an
 			alternative.
 
-		<DEVNAME>:<n>.<n>[,options]
-			Use the specified serial port on the serial core bus.
-			The addressing uses DEVNAME of the physical serial port
-			device, followed by the serial core controller instance,
-			and the serial port instance. The options are the same
-			as documented for the ttyS addressing above.
-
-			The mapping of the serial ports to the tty instances
-			can be viewed with:
-
-			$ ls -d /sys/bus/serial-base/devices/*:*.*/tty/*
-			/sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0
-
-			In the above example, the console can be addressed with
-			console=00:04:0.0. Note that a console addressed this
-			way will only get added when the related device driver
-			is ready. The use of an earlycon parameter in addition to
-			the console may be desired for console output early on.
-
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio16,<addr>[,options]
@@ -2192,12 +2173,6 @@
 			Format: 0 | 1
 			Default set by CONFIG_INIT_ON_FREE_DEFAULT_ON.
 
-	init_mlocked_on_free=	[MM] Fill freed userspace memory with zeroes if
-				it was mlock'ed and not explicitly munlock'ed
-				afterwards.
-				Format: 0 | 1
-				Default set by CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON
-
 	init_pkru=	[X86] Specify the default memory protection keys rights
 			register contents for all processes.  0x55555554 by
 			default (disallow access to all but pkey 0).  Can

Documentation/devicetree/bindings/dma/fsl,edma.yaml

@@ -59,8 +59,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1

Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml

@@ -77,7 +77,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml

@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml

@@ -128,7 +128,6 @@ required:
   - cell-index
   - reg
   - fsl,fman-ports
-  - ptp-timer
 
 dependencies:
   pcs-handle-names:

Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml

@@ -29,7 +29,6 @@ properties:
           - qcom,pm7325-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
-          - qcom,pm8008-gpio
           - qcom,pm8018-gpio
           - qcom,pm8019-gpio
           - qcom,pm8038-gpio
@@ -126,7 +125,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pm8008-gpio
               - qcom,pmi8950-gpio
               - qcom,pmr735d-gpio
     then:
@@ -448,7 +446,6 @@ $defs:
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio8 for pm7550ba
                  - gpio1-gpio4 for pm8005
-                 - gpio1-gpio2 for pm8008
                  - gpio1-gpio6 for pm8018
                  - gpio1-gpio12 for pm8038
                  - gpio1-gpio40 for pm8058

Documentation/filesystems/proc.rst

@@ -571,6 +571,7 @@ encoded manner. The codes are the following:
     um    userfaultfd missing tracking
     uw    userfaultfd wr-protect tracking
     ss    shadow stack page
+    sl    sealed
     ==    =======================================
 
 Note that there is no guarantee that every flag and associated mnemonic will

Documentation/i2c/i2c_bus.svg

@@ -3,59 +3,80 @@ Introduction to I2C and SMBus
 =============================
 
 I²C (pronounce: I squared C and written I2C in the kernel documentation) is
-a protocol developed by Philips. It is a slow two-wire protocol (variable
-speed, up to 400 kHz), with a high speed extension (3.4 MHz).  It provides
+a protocol developed by Philips. It is a two-wire protocol with variable
+speed (typically up to 400 kHz, high speed modes up to 5 MHz). It provides
 an inexpensive bus for connecting many types of devices with infrequent or
-low bandwidth communications needs.  I2C is widely used with embedded
-systems.  Some systems use variants that don't meet branding requirements,
+low bandwidth communications needs. I2C is widely used with embedded
+systems. Some systems use variants that don't meet branding requirements,
 and so are not advertised as being I2C but come under different names,
 e.g. TWI (Two Wire Interface), IIC.
 
-The latest official I2C specification is the `"I2C-bus specification and user
-manual" (UM10204) <https://www.nxp.com/webapp/Download?colCode=UM10204>`_
-published by NXP Semiconductors. However, you need to log-in to the site to
-access the PDF. An older version of the specification (revision 6) is archived
-`here <https://web.archive.org/web/20210813122132/https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_.
+The latest official I2C specification is the `"I²C-bus specification and user
+manual" (UM10204) <https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_
+published by NXP Semiconductors, version 7 as of this writing.
 
 SMBus (System Management Bus) is based on the I2C protocol, and is mostly
-a subset of I2C protocols and signaling.  Many I2C devices will work on an
+a subset of I2C protocols and signaling. Many I2C devices will work on an
 SMBus, but some SMBus protocols add semantics beyond what is required to
-achieve I2C branding.  Modern PC mainboards rely on SMBus.  The most common
+achieve I2C branding. Modern PC mainboards rely on SMBus. The most common
 devices connected through SMBus are RAM modules configured using I2C EEPROMs,
 and hardware monitoring chips.
 
 Because the SMBus is mostly a subset of the generalized I2C bus, we can
-use its protocols on many I2C systems.  However, there are systems that don't
+use its protocols on many I2C systems. However, there are systems that don't
 meet both SMBus and I2C electrical constraints; and others which can't
 implement all the common SMBus protocol semantics or messages.
 
 
 Terminology
 ===========
 
-Using the terminology from the official documentation, the I2C bus connects
-one or more *master* chips and one or more *slave* chips.
+The I2C bus connects one or more controller chips and one or more target chips.
 
 .. kernel-figure::  i2c_bus.svg
-   :alt:    Simple I2C bus with one master and 3 slaves
+   :alt:    Simple I2C bus with one controller and 3 targets
 
    Simple I2C bus
 
-A **master** chip is a node that starts communications with slaves. In the
-Linux kernel implementation it is called an **adapter** or bus. Adapter
-drivers are in the ``drivers/i2c/busses/`` subdirectory.
+A **controller** chip is a node that starts communications with targets. In the
+Linux kernel implementation it is also called an "adapter" or "bus". Controller
+drivers are usually in the ``drivers/i2c/busses/`` subdirectory.
 
-An **algorithm** contains general code that can be used to implement a
-whole class of I2C adapters. Each specific adapter driver either depends on
-an algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes
-its own implementation.
+An **algorithm** contains general code that can be used to implement a whole
+class of I2C controllers. Each specific controller driver either depends on an
+algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes its
+own implementation.
 
-A **slave** chip is a node that responds to communications when addressed
-by the master. In Linux it is called a **client**. Client drivers are kept
-in a directory specific to the feature they provide, for example
-``drivers/media/gpio/`` for GPIO expanders and ``drivers/media/i2c/`` for
+A **target** chip is a node that responds to communications when addressed by a
+controller. In the Linux kernel implementation it is also called a "client".
+While targets are usually separate external chips, Linux can also act as a
+target (needs hardware support) and respond to another controller on the bus.
+This is then called a **local target**. In contrast, an external chip is called
+a **remote target**.
+
+Target drivers are kept in a directory specific to the feature they provide,
+for example ``drivers/gpio/`` for GPIO expanders and ``drivers/media/i2c/`` for
 video-related chips.
 
-For the example configuration in figure, you will need a driver for your
-I2C adapter, and drivers for your I2C devices (usually one driver for each
-device).
+For the example configuration in the figure above, you will need one driver for
+the I2C controller, and drivers for your I2C targets. Usually one driver for
+each target.
+
+Synonyms
+--------
+
+As mentioned above, the Linux I2C implementation historically uses the terms
+"adapter" for controller and "client" for target. A number of data structures
+have these synonyms in their name. So, when discussing implementation details,
+you should be aware of these terms as well. The official wording is preferred,
+though.
+
+Outdated terminology
+--------------------
+
+In earlier I2C specifications, controller was named "master" and target was
+named "slave". These terms have been obsoleted with v7 of the specification and
+their use is also discouraged by the Linux Kernel Code of Conduct. You may
+still find them in references to documentation which has not been updated. The
+general attitude, however, is to use the inclusive terms: controller and
+target. Work to replace the old terminology in the Linux Kernel is on-going.