update readme

Author: RCmags

README.md

@@ -1,7 +1,5 @@
 # PulseInput
-This is a simple library for an interrupt based, non-blocking alternative to Arduino's [pulseIn](https://reference.arduino.cc/reference/cs/language/functions/advanced-io/pulsein/) function. 
-
-It's well suited to read the channels of a RC receiver or the output of an ultrasonic distance sensor. Given that it uses interrupts to measure the signals, one can read multiple signals without delays in the main loop.  
+This is a simple library for an interrupt based, non-blocking alternative to Arduino's [pulseIn](https://reference.arduino.cc/reference/cs/language/functions/advanced-io/pulsein/) function. Since it uses interrupts to measure signals, one can read multiple signals without fear of delays in the main loop.  
 
 # How it works
 A pin change interrupt is used to detect when a signal is rising or falling, and the _on-time_ of the signal is measured in microseconds. As such, this library is only suited to decode PWM-like signals, where the time of the pulse-width (on-time) determines the value of the signal.