diff --git a/README.md b/README.md
index 8a9f1ba..fd73ab0 100644
--- a/README.md
+++ b/README.md
@@ -1,187 +1,3 @@
# Test-PSModule
-Tests PowerShell module repos using PSModule framework rules.
-
-This GitHub Action is a part of the [PSModule framework](https://github.com/PSModule). It is recommended to use the
-[Process-PSModule workflow](https://github.com/PSModule/Process-PSModule) to automate the whole process of managing the PowerShell module.
-
-## Specifications and practices
-
-Test-PSModule enables:
-
-- [Test-Driven Development](https://testdriven.io/test-driven-development/) using [Pester](https://pester.dev) via [Invoke-Pester](https://github.com/PSModule/Invoke-Pester).
-
-## How it works
-
-- The action runs test on the module repository based on `Settings`:
- - `SourceCode` - Tests source code style and standards based on PSModule framework rules.
- - `Module` - Tests the module build module style and standards based on PSModule framework rules.
- - The module is imported in its own context to avoid conflicts with other modules.
-- The action returns the test results as action [outputs](#outputs).
-- The following reports are calculated and uploaded as artifacts. This is done to support the action being run in matrix jobs.
- - Test suite results. In [Process-PSModule](https://github.com/PSModule/Process-PSModule) this is evaluated in a later job by [Get-PesterTestResults](https://github.com/PSModule/Get-PesterTestResults)
- - Code coverage results. In [Process-PSModule](https://github.com/PSModule/Process-PSModule) this is evaluated in a later job by [Get-PesterCodeCoverage](https://github.com/PSModule/Get-PesterCodeCoverage)
-
-The action fails if any of the tests fail or it fails to run the tests.
-This is mitigated by the `continue-on-error` option in the workflow.
-
-## How to use it
-
-It is recommended to use the [Process-PSModule workflow](https://github.com/PSModule/Process-PSModule) to automate the whole process of managing the PowerShell module.
-
-To use the action, create a new file in the `.github/workflows` directory of the module repository and add the following content.
-
-Workflow suggestion - before module is built
-
-```yaml
-name: Test-PSModule
-
-on: [push]
-
-jobs:
- Test-PSModule:
- name: Test-PSModule
- runs-on: ubuntu-latest
- steps:
- - name: Checkout repo
- uses: actions/checkout@v4
-
- - name: Initialize environment
- uses: PSModule/Initialize-PSModule@main
-
- - name: Test-PSModule
- uses: PSModule/Test-PSModule@main
- with:
- Settings: SourceCode
-
-```
-
-
-
-Workflow suggestion - after module is built
-
-```yaml
-name: Test-PSModule
-
-on: [push]
-
-jobs:
- Test-PSModule:
- name: Test-PSModule
- runs-on: ubuntu-latest
- steps:
- - name: Checkout repo
- uses: actions/checkout@v4
-
- - name: Initialize environment
- uses: PSModule/Initialize-PSModule@main
-
- - name: Test-PSModule
- uses: PSModule/Test-PSModule@main
- with:
- Settings: Module
-
-```
-
-
-## Usage
-
-### Inputs
-
-| Name | Description | Required | Default |
-| ---- | ----------- | -------- | ------- |
-| `Name` | The name of the module to test. The name of the repository is used if not specified. | `false` | |
-| `Settings` | The type of tests to run. Can be either `Module` or `SourceCode`. | `true` | |
-| `Debug` | Enable debug output. | `false` | `'false'` |
-| `Verbose` | Enable verbose output. | `false` | `'false'` |
-| `Version` | Specifies the version of the GitHub module to be installed. The value must be an exact version. | `false` | |
-| `Prerelease` | Allow prerelease versions if available. | `false` | `'false'` |
-| `WorkingDirectory` | The working directory to use for the action. This is the root folder where tests and outputs are expected. | `false` | `'.'` |
-| `StepSummary_Mode` | Controls which tests to show in the GitHub step summary. Allows "Full" (all tests), "Failed" (only failed tests), or "None" (disable step summary). | `false` | `Failed` |
-| `StepSummary_ShowTestOverview` | Controls whether to show the test overview table in the GitHub step summary. | `false` | `false` |
-| `StepSummary_ShowConfiguration` | Controls whether to show the configuration details in the GitHub step summary. | `false` | `false` |
-| `Run_ExcludePath` | Directories/files to exclude from the run. | `false` | |
-| `Run_ScriptBlock` | ScriptBlocks containing tests to be executed. | `false` | |
-| `Run_Container` | ContainerInfo objects containing tests to be executed. | `false` | |
-| `Run_TestExtension` | Filter used to identify test files (e.g. `.Tests.ps1`). | `false` | |
-| `Run_Exit` | Whether to exit with a non-zero exit code on failure. | `false` | |
-| `Run_Throw` | Whether to throw an exception on test failure. | `false` | |
-| `Run_SkipRun` | Discovery only, skip actual test run. | `false` | |
-| `Run_SkipRemainingOnFailure` | Skips remaining tests after the first failure. Options: `None`, `Run`, `Container`, `Block`. | `false` | |
-| `Filter_Tag` | Tags of Describe/Context/It blocks to run. | `false` | |
-| `Filter_ExcludeTag` | Tags of Describe/Context/It blocks to exclude. | `false` | |
-| `Filter_Line` | Filter by file + scriptblock start line (e.g. `C:\tests\file1.Tests.ps1:37`). | `false` | |
-| `Filter_ExcludeLine` | Exclude by file + scriptblock start line. Precedence over `Filter_Line`. | `false` | |
-| `Filter_FullName` | Full name of a test with wildcards, joined by dot. E.g. `*.describe Get-Item.test1` | `false` | |
-| `CodeCoverage_Enabled` | Enable code coverage. | `false` | |
-| `CodeCoverage_OutputFormat` | Format for the coverage report. Possible values: `JaCoCo`, `CoverageGutters`, `Cobertura`. | `false` | |
-| `CodeCoverage_OutputPath` | Where to save the code coverage report (relative to the current dir). | `false` | |
-| `CodeCoverage_OutputEncoding` | Encoding of the coverage file. | `false` | |
-| `CodeCoverage_Path` | Files/directories to measure coverage on (by default, reuses `Path` from the general settings). | `false` | |
-| `CodeCoverage_ExcludeTests` | Exclude tests themselves from coverage. | `false` | |
-| `CodeCoverage_RecursePaths` | Recurse through coverage directories. | `false` | |
-| `CodeCoverage_CoveragePercentTarget` | Desired minimum coverage percentage. | `false` | |
-| `CodeCoverage_UseBreakpoints` | **Experimental**: When `false`, use a Profiler-based tracer instead of breakpoints. | `false` | |
-| `CodeCoverage_SingleHitBreakpoints` | Remove breakpoints after first hit. | `false` | |
-| `TestResult_Enabled` | Enable test-result output (e.g. NUnitXml, JUnitXml). | `false` | |
-| `TestResult_OutputFormat` | Possible values: `NUnitXml`, `NUnit2.5`, `NUnit3`, `JUnitXml`. | `false` | |
-| `TestResult_OutputPath` | Where to save the test-result report (relative path). | `false` | |
-| `TestResult_OutputEncoding` | Encoding of the test-result file. | `false` | |
-| `Should_ErrorAction` | Controls if `Should` throws on error. Use `Stop` to throw, or `Continue` to fail at the end. | `false` | |
-| `Debug_ShowFullErrors` | Show Pester internal stack on errors. (Deprecated – overrides `Output.StackTraceVerbosity` to `Full`). | `false` | |
-| `Debug_WriteDebugMessages` | Write debug messages to screen. | `false` | |
-| `Debug_WriteDebugMessagesFrom` | Filter debug messages by source. Wildcards allowed. | `false` | |
-| `Debug_ShowNavigationMarkers` | Write paths after every block/test for easy navigation in Visual Studio Code. | `false` | |
-| `Debug_ReturnRawResultObject` | Returns an unfiltered result object, for development only. | `false` | |
-| `Output_Verbosity` | Verbosity: `None`, `Normal`, `Detailed`, `Diagnostic`. | `false` | |
-| `Output_StackTraceVerbosity` | Stacktrace detail: `None`, `FirstLine`, `Filtered`, `Full`. | `false` | |
-| `Output_CIFormat` | CI format of error output: `None`, `Auto`, `AzureDevops`, `GithubActions`. | `false` | |
-| `Output_CILogLevel` | CI log level: `Error` or `Warning`. | `false` | |
-| `Output_RenderMode` | How to render console output: `Auto`, `Ansi`, `ConsoleColor`, `Plaintext`. | `false` | |
-| `TestDrive_Enabled` | Enable `TestDrive`. | `false` | |
-| `TestRegistry_Enabled` | Enable `TestRegistry`. | `false` | |
-
-### Outputs
-
-| Output | Description |
-|-------------------------|--------------------------------------|
-| `Outcome` | Outcome of the test run. |
-| `Conclusion` | Conclusion status of test execution. |
-| `Executed` | Indicates if tests were executed. |
-| `Result` | Overall result (`Passed`, `Failed`). |
-| `FailedCount` | Number of failed tests. |
-| `FailedBlocksCount` | Number of failed blocks. |
-| `FailedContainersCount` | Number of failed containers. |
-| `PassedCount` | Number of passed tests. |
-| `SkippedCount` | Number of skipped tests. |
-| `InconclusiveCount` | Number of inconclusive tests. |
-| `NotRunCount` | Number of tests not run. |
-| `TotalCount` | Total tests executed. |
-
-## PSModule tests
-
-### SourceCode tests
-
-The [PSModule - SourceCode tests](./scripts/tests/SourceCode/PSModule/PSModule.Tests.ps1) verifies the following coding practices that the framework enforces:
-
-| ID | Category | Description |
-|---------------------|---------------------|--------------------------------------------------------------------------------------------|
-| NumberOfProcessors | General | Should use `[System.Environment]::ProcessorCount` instead of `$env:NUMBER_OF_PROCESSORS`. |
-| Verbose | General | Should not contain `-Verbose` unless it is explicitly disabled with `:$false`. |
-| OutNull | General | Should use `$null = ...` instead of piping output to `Out-Null`. |
-| NoTernary | General | Should not use ternary operations to maintain compatibility with PowerShell 5.1 and below. |
-| LowercaseKeywords | General | All PowerShell keywords should be written in lowercase. |
-| FunctionCount | Functions (Generic) | Each script file should contain exactly one function or filter. |
-| FunctionName | Functions (Generic) | Script filenames should match the name of the function or filter they contain. |
-| CmdletBinding | Functions (Generic) | Functions should include the `[CmdletBinding()]` attribute. |
-| ParamBlock | Functions (Generic) | Functions should have a parameter block (`param()`). |
-| FunctionTest | Functions (Public) | All public functions/filters should have corresponding tests. |
-
-### Module tests
-
-The [PSModule - Module tests](./scripts/tests/Module/PSModule/PSModule.Tests.ps1) verifies the following coding practices that the framework enforces:
-
-| Name | Description |
-| ------ | ----------- |
-| Module Manifest exists | Verifies that a module manifest file is present. |
-| Module Manifest is valid | Verifies that the module manifest file is valid. |
+This GitHub Action is a part of the [PSModule framework](https://github.com/PSModule).
diff --git a/action.yml b/action.yml
index 2701134..f497d1a 100644
--- a/action.yml
+++ b/action.yml
@@ -1,9 +1,6 @@
-name: Test-PSModule (by PSModule)
+name: Test-PSModule
description: Test a PowerShell module before publishing the module to the PowerShell Gallery.
author: PSModule
-branding:
- icon: check-square
- color: gray-dark
inputs:
Name: