PCB Design
I've designed a simple PCB design for ESP8266 boards.
The board dimensions are 38mm x 26mm, and compatible with ESP-12E/F and ESP-07S boards.
Note: For controlling the LED strip, this module uses GPIO3 (same pin as RXD on Wemos D1 Mini). If You are using Wemos D1 Mini or any ESP8266 board, you must have to use a logic level shifter. ESP8266 chips are using 3.3V logic, but - reference to the WS2812B's datasheet - the LED strip's data line using 5V logic with minimum of 3.5V. Without the logic level shifter the LED strip may not work properly or could be damaged!
For PCB manufacturing Gerber files can be downloaded from here.
| Prefix | Value | Package |
|---|---|---|
| R1 | 10K Ω | SMD 0805 |
| R2 | 10K Ω | SMD 0805 |
| R3 | 10K Ω | SMD 0805 |
| R4 | 10K Ω | SMD 0805 |
| C1 | 100nF | SMD 0805 |
| C2 | 10uF | SMD 0805 |
| C3 | 10uF | SMD 0805 |
| C4 | 100nF | SMD 0805 |
| C5 | 10V 1000uF | SMD 8x10 |
| IC1 | AMS1117-3.3 | SOT223 |
| Q1 | BSS138 | SOT23-3 |
| U1 | DC adapter | 5.5x2.1mm jack |
| Reset | Tactile Touch Key | SMD 6.1x3.7mm |
| Serial | 2.54mm 4P header | (optional) |
