Copy and Paste needs adjustment

[cyberjak2k]

when you use Copy then Paste ( the equivalent of Duplicate in TinkerCad ) the new object is creeated in a sometimes large offset to the original object.
this causes a problem that can slow down creation.
Example:
create a box 50x50x50mm, dupliacte the box, change new object to a negative volume, adjust it's size to 48x48x50mm, raise it's position by 2mm, then join it to the original box. this would create a box with an open top and 2mm thick perimeter walls and floor

presently it looks like an offes in Y by -50mm or more from the original object origin
either it should be like dupicate in TinkerCad, or it should be an adjustable offset , so that if the user wishes 0x0x0 offset they can set this in the settings

[rondlh]

when you use Copy then Paste ( the equivalent of Duplicate in TinkerCad ) the new object is creeated in a sometimes large offset to the original object.

The equivalent of duplicate in TinkerCad is duplicate in CaDoodle, shortcut is CTRL+D, so if the user wishes a 0x0x0 offset then that's the way to do it.

If I do a Copy and Paste in CaDoodle then the new object is put at an offset of X+20 compared to the original object.
In TinkerCAD the new object offset seems to be X+(OBJECT_SIZE/2).

Both seems fine to me.

[madhephaestus]

I think copying the exact tinkercad process here makes sense. There also needs to be a Duplicate button, like there is in tinkercad.